Del ozone CDS-16 Specifications download pdf (Page 4)

HECD–65 & HECD–130 Installation & Operations Manual

SECTION 1 General Information

1A. Description

The Corona Discharge ozone generator described

in this manual is designed to provide the benefits of

ozone gas in an environmentally safe and effective

manner. The high quality, specially engineered

components ensure efficient ozone output and

reliable performance.

1B. Specifications

1B-1. Ozone Output

See specification label on inside of door.

1B-2. Power Requirements

See specification label on inside of door.

1B-3. Weight

HECD–65: 410lbs; HECD–130: 540lbs

1B-4. Location Requirements

Mounting: Mount in a clean, protected area.

Ambient Temp.: 40°F – 90°F (5 – 40°C)

1C. Standard Features

Models available for ozone production rates of 1.

65 and 130 grams per hour.

Medium Frequency, Cold Cathode Corona 2.

Discharge.

Water cooled vertical tube in shell design.3.

Glass tube dielectric.4.

All stainless steel generator module.5.

Incorporated Oxygen concentrator.6.

Computer controlled with 4 line backlit LCD text 7.

display operator interface.

Variable output.8.

Complete ozone isolation during shut-down.9.

Auto feed-gas flow control to maintain proper 10.

operational set points.

Amperage display and monitoring by the control 11.

system.

NEMA-3R White powder coated steel 12.

enclosure.

Contacts for remote:13.

Remote shut-downa.

Remote pauseb.

Fault protection from:14.

Water backflowa.

Door openb.

Cooling water flow lossc.

Feed gas pressure failured.

Low oxygen concentratione.

Suction lossf.

Overheatingg.

High ambient air temperatureh.

1D. Accessories & Optional Equipment

Ambient ozone monitor / controller1.

Dissolved ozone monitor / controller2.

Mixing / Degassing tower3.

Contact / Degas tanks4.

Degas valves5.

Catalytic ozone destruct units6.

Dry-Tap sensor port7.

Injectors & injector assemblies8.

Ozone flow splitters / controllers9.

Closed-loop cooling10.

Flow switches11.

Booster pumps12.

1E. Warranty Summary

Limited Warranty: Two (2) years on entire

generator (providing required routine maintenance

is performed). See Warranty Section for details.

SECTION 2 Installation

Upon receipt inspect HECD generator for 1.

evidence of shipping damage. Immediately

report any damage to the shipping company

and DEL Ozone.

Once the generator is in its mounting position, 2.

bolt down using the 5/16” mounting holes in the

cabinet feet.

Connect Water In/Out: ½” FPT fittings are 3.

provided on field connection panel as shown

in Figure 1. Plumb the cooling water from a

clean, filtered source using copper, Teflon, or

PVC tubing. DO NOT USE WATER HIGH IN

CHLORIDE! Flow requirements for each unit

are listed in the specifications label on the

inside of the cabinet door.

Connect Ozone Out: A ¼” FPT stainless steel 4.

fitting is provided on the field connection panel

as shown in Figure 1. Plumb the ozone output

to the injector assembly input via a stainless

steel ball valve and check valve. See Figure 2.

Ozone supply tubing must be constructed

of 316 stainless steel or rigid Teflon tubing.

Use of any other material will lead to failure

of the tubing and cause vacuum loss or allow

ozone to escape the system.

1 2 3 4 5 6 7 8 9 ... 23 24

Comments to this Manuals

No comments

Del ozone CDS-16 Specifications Page 4

Comments to this Manuals

Related products and manuals for Power generators Del ozone CDS-16