Del ozone CDS-16 Specifications download pdf (Page 4)

Genesis CD–15G and CD–25G Installation & Operations Manual

2C. Electrical

Refer to the units specification label and local

electrical codes for information on proper electrical

connection.

120V Models

Main power circuit: Unit is supplied with a

standard power cord. Plug cord into standard

 120Vgrounded,goundingtypereceptacleonly.

230V Models

Main power circuit: 230V models are supplied

with an IEC 6032 C-14 Type power receptacle.

 Apowercord,havingatleasta10AMPrating,with

a IEC 60320 C-13 Type plug and a country specific

 plugisrequiredtopowergenerator.

2D. Plumbing

 Ozonegasisintroducedtothecirculationline 

 usingaventuriinjector.Suctiondevelopedbythe 

venturi allows the generator to operate safely under

vacuum. See installation manual for MX-601-XX

for proper venturi installation.

2D-1. Ozone Gas Line

 1.Connectozonetubingtogeneratoroutletfitting.

  (3/8"stainlesssteelcompressionfitting.)

 2.Connectoppositeendofozonetubingtoinjector

  suctionport.(Suctionportfitting:3/8"stainless 

steel compression fitting.) See Figure 4.

NOTE: The ozone gas supply line must be

made of Teflon or stainless steel and have a

back flow prevention device (such as a check

valve) installed between the ozone generator

cabinet and the point of injection to prevent

water from backing up into the generator

system. An ozone supply check valve is

included with the MX–601–XX system.

Figure 4: Plumbing Schematic - Example of Swimming Pool Application

Figure 3: Country Speciﬁc Plug

(Australia shown for reference only)

1 2 3 4 5 6 7 8 9 ... 23 24

No comments

Del ozone CDS-16 Specifications Page 4